Perfboard Designer

Changes a project kept here, by a list of ops applied in order: add_part, update_part (move, turn, change value or ref), remove_parts, add_wire (from/to, or a `path` of holes made into one wire per leg), update_wire, remove_wires, set_board, add_cuts / remove_cuts (stripboard), set_pad (a note on a hole), set_description (what the board is and how it works, for whoever opens it). If any op can't be done, none are. Returns what changed, where the pins of added or moved parts landed, and the board checked as validate_project does (with any expectNets remembered for it); when it has no errors, also its nets. get_project returns the whole file. The goal is a board that's right, looks neat and is easy to solder, not just the shortest wires: parts in tidy rows near what they connect to, connectors at the edges, straight wires with few corners and no crossing you can avoid, none over a part's body. Before giving the user the link, look at it (render_board with format "png"), rework what's messy and check it again.

Which pins the board connects: every net with its name (from its pins, e.g. GND), its pins ("U1.8 VCC" for a chip's pin, "D1.K" or "C1.+" for a polarized lead, "R1.1" otherwise) and the wires on it (indexes into wires). Also pins connected to nothing, wires that connect no pins, junctions (holes where three or more things are joined) and crossings (where a wire goes over another wire or over a hole without joining it). Wires are insulated jumpers: a wire joins only the holes at its two ends, so crossings are information, not connections or shorts. On a stripboard the strips connect too.

Everything needed to place parts: for each, which project file list it goes in, its pins (offsets from pin 1 at rotation 0) and pin labels, polarity, value unit, holes its body covers, and an example entry. Ask for every part you use in one call with `ids`.

Where every placed part's pins land, as [column, row] holes, with pin numbers and labels (e.g. U1 pin 8 VCC), after rotation, plus holes a part's body covers. Use it to route wires to the right holes. The project file doesn't store these: they follow from each part's anchor, rotation and footprint.

The whole project file of a project kept here, as the editor would save it (through version 8, preserving component identities and optional requirements), one entry per line.

Lists the parts a project can place. Without a query: every part, grouped by category, as its id with its name and pin count; call it this way once to see what there is. With a query: the parts whose id, name, category or keywords contain all its words, or the closest ones when none do. Each part's `id` is its definitionId in the project file; use get_part for its pins and how to place it.

Turns a project into a link that opens it in Perfboard Designer: the project travels inside the link, so it works without any server. Give the link to the user. A project with a description (edit_project's set_description) also gets `page`: the same link opening a page to read, with the board, its description, parts and nets, for the user to send to others. Also returns `image`, the address of an SVG picture of the board (as the editor draws it), for showing it where images from links display, e.g. in Markdown (not in Claude or ChatGPT, which don't load them: show_board shows the board there). With store, the project is also stored on the Perfboard Designer server under a short id, and `stored` gives a short link to it, its file and its pictures (SVG and PNG): give the user both links. The project is validated first (against enabled saved requirements and expectNets too, given or remembered for its projectId); a project with errors gets the list of problems instead of a link, unless allowErrors is set.

Starts a project kept here under a projectId: a blank board, or one of the example projects (perfboard://examples/...) to copy from. Returns the projectId and the project file. Then add parts and wires with edit_project, and pass the projectId to every other tool instead of the whole file.

Reads the project out of a Perfboard Designer share link (z=, json=, downloaded src=, or a stored short link). Returns a project file through version 8, preserving component identities and optional requirements, kept under the returned projectId: change it with edit_project.

Draws the board as text, one cell per hole with column and row numbers: each part's pins by a key letter and pin number (a1, a2...), holes under a part's body, wire ends, the holes a wire runs over without joining them, strip cuts and holes with notes. Below it, which part each key is and every wire with its ends and net. Use it to see where there's free space and how wires run before placing parts or routing more. With format "png", a picture of the board as the editor draws it instead, to see how it looks: parts' bodies and where they reach, labels, wire colours. To show the user the board, use show_board.

Shows the user a picture of the board right in the conversation, as the editor draws it, with a button that opens it in Perfboard Designer. Only in clients that show MCP Apps (e.g. Claude, ChatGPT); elsewhere the user sees nothing, so give them make_share_link's link too. The picture goes to the user, not to you: to look at the board yourself, use render_board.

Checks a project file and lists every problem with where it is: entries the editor would leave out, unknown parts, pins off the board, two parts' pins or leads in one hole, overlapping parts, wires that connect nothing (a loose end, or no pins on their net), duplicate wires, a two-lead part with both leads on one net (shorted out), a wire passing over a pin or lead without ending there (so not joined to it), IC pins and two-lead parts' leads connected to nothing, supply rails shorted together (a positive supply and ground, two different voltages, a battery's two terminals; VCC with 5V or GND with AGND is one rail), polarized parts in backwards (an LED, an electrolytic capacitor or + and − pins the wrong way round on the supply rails, or a diode conducting straight across the supply), and on a stripboard, pins shorted by a strip or sitting in a cut hole. The rails are pins named like VCC, GND or 5V, battery holders' terminals, and holes noted with a rail's name ("+9V"). With expectNets, every connection missing from the board or extra on it is an error. Enabled saved requirements also check intended connections, missing components/pins and unused pins; unspecified pins produce an incomplete-coverage warning, not a full match. Wires crossing each other are fine (insulated jumpers) and only listed in notes. Fix all errors before making a link. A project sent whole is kept here: the reply's projectId stands for it in every other tool.