Responded16 / 22 checks passed
Findings on what compounds and supplements do in the body, with evidence strength, quote and paper.
- Passed: Handshake
- Passed: Tools listed
- Passed: Updated recently
Median latency 699 ms · Last checked
Independent monitoring
Health & checks
Outdated check
Last connection measurement is over 24 hours old. Current availability is unknown.
Last checked| Test area | Passed | Failed | Unmeasured |
|---|---|---|---|
ConnectionCan a client connect and discover tools? | 5 | 0 | 0 |
Reliability & speedDoes it respond consistently and quickly? | 0 | 0 | 4 |
Access & authenticationWhat is required to use this server? | 1 | 0 | 2 |
Tool qualityAre the tool definitions usable by an agent? | 4 | 0 | 0 |
Publisher identityCan the publisher be traced to its source? | 3 | 1 | 2 |
Unmeasured means there is not enough evidence to decide. How these checks work
Inspect individual checks 22 recorded
Core
- Pass
- Pass
- Pass
- Pass
- Pass
Performance
- Not measured
- Not measured
- Not measured
- Not measured
Access
- Pass
- Not measured
- Not measured
Tools
- Pass
- Pass
- Pass
- Pass
Publisher
- Pass
- Pass
- Fail
- Not measured
- Pass
- Not measured
Start using Calculiva Cut Planner
Connect to this server
Choose your client, copy the configuration, then enable the server in your client’s MCP settings.
Run this command in your terminal, then restart Claude Code.
Claude Code
claude mcp add --transport http calculiva-cut-planner https://mcp.calculiva.com/mcpCapabilities
Tools 4
build_order_sheet
Builds one consolidated order sheet from the flooring, trim and wallpaper plans of the same project (pass the same arguments as plan_flooring_order, plan_trim_order and plan_wallpaper_order): cartons, boards per stock length, rolls, total offcuts, the cut list by material and a CSV. Trim pieces of all walls and all types (battens, rails, chair rail, frames) are packed together on the stock boards, and the sheet compares that with one order per wall, each wall on its own best stock length (total length bought, then offcut, then boards).
Discoveredplan_flooring_order
Plans laminate, vinyl plank (LVP) or engineered plank flooring for 1 to 12 rooms, rectangles or L shapes, with the plank size and planks per carton from the carton: cartons to buy, every cut piece traced to its source plank, offcuts carried from one room to the next, the 8 scenarios (direction x offset 1/3 or 1/2 x reuse, plus aligned joints in the chosen direction when offset 0 is chosen) and the best one when no other ties it (fewest cartons, then least offcut, then fewest planks), and how many planks a flat waste allowance would miss. Up to 3,000 planks per call. Lengths accept feet and inches. Returns a link per room to the full plan on calculiva.com.
Discoveredplan_trim_order
Plans board and batten, wainscoting or picture frame molding on one wall: spacing, the cut list (miter long and short points for frames) and how many boards of each retail length to buy, with the total length bought and offcut percentage for each stock length; the length to buy is the one that buys the least total length, then the least offcut, then the fewest boards. The cut plan is first-fit decreasing: feasible, not proven optimal. Lengths accept feet and inches. Returns a link to the full plan on calculiva.com.
Discoveredplan_wallpaper_order
Counts the wallpaper rolls to buy from the walls, doors and windows and the roll label (width, length, pattern repeat, match): drops per roll, every cut placed on its roll, match waste, and the straight / half-drop / random comparison. Lengths accept feet and inches. Returns a link to the full plan on calculiva.com.
DiscoveredRecent measurements
Probe history
| Checked | Result | Response | Tools |
|---|---|---|---|
| Connected | 471 ms | 4 |